SKB iSeries Case for Sony A7 + A7II Series (3I-13096SA7)

  • SKB iSeries Case for Sony A7 + A7II Series (3I-13096SA7) - 1
  • SKB iSeries Case for Sony A7 + A7II Series (3I-13096SA7) - 2
  • SKB iSeries Case for Sony A7 + A7II Series (3I-13096SA7) - 3
SKB iSeries Case for Sony A7 + A7II Series (3I-13096SA7)
  • Camera Case for Sony A7 & A7 II Series and accessories


    This Military-Standard waterproof hard case was designed for photographers who don't want to bring all of their gear with them, but need the essentials. The interior is custom cut of high quality PE foam that includes space for a Sony A7, A7R , A7RII or A7S camera body with lens attached, lens hood section, two lens slots, and accessory pocket.

    A removable section of foam will allow a 70-200mm lens to stay attached to the camera. Each lens slot has three half inch removable rings to fit a variety of lenses. The 3i-13096SA7 case provides the ultimate protection for essential photo gear and is backed by SKB’s unsurpassed Lifetime Warranty.

    Lifetime Warranty

    SKB-branded hardshell cases are fully warranted against defects in materials and craftsmanship for the life of the case to the original owner. That means if your case breaks, SKB will supply replacement parts, repair the case, or replace your case for as long as you own it. Proof of Purchase is required for all warranty claims.

    Electronic components in SKB brand hardshell pedalboard systems are warranted for five years from date of purchase. Soft cases and gig bags are warranted for one year from date of purchase. Foam is not covered by SKB’s warranty.


    • Custom cut PE foam to fit the Sony A7, A7R, A7RII or A7S body with a 70-200 lens attached, lens hoods, two lens slots and accessories
    • Unconditional Lifetime Warranty
    • Ultra high-strength polypropylene copolymer resin
    • UV, solvent, corrosion and fungus resistant (MIL-STD-810F)
    • Complete gasket seal makes these cases absolutely watertight (MIL-STD-C-4150J)
    • Automatic ambient pressure equalization valve (MIL-STD-648C & IP67)
    • Resistant to corrosion and impact damage
    • Molded-in hinge
    • Rubber over-molded cushion grip handle
    • Locking loops for a customer supplied lock
    • Patented "trigger release" latch system

    Camera compartment is 6.875" long from back of view finder to removable wall. Camera compartment is 12.5" from back of view finder to end wall with removable wall removed. Lens compartments have a diameter of 3.5" and are 4.75" deep without any spacers. With removable wall left in, the compartment size is 5"x4.25"x4". Small accessory pocket is 4"x2.5"x3.75".


      • Exterior Length: 17.73 in / 45.03 cm
      • Exterior Width: 11.94 in / 30.33 cm
      • Exterior Depth: 7.31 in / 18.57 cm
      • Product Weight: 5.20 lb / 2.36 kg
    • Zu diesem Produkt sind keine technischen Daten verfügbar.
    • Zu diesem Produkt ist kein Zubehör zugeordnet.
    • Zu diesem Produkt sind keine Downloads oder Videos verfügbar.